Hauppauge Wintv8789 Vfw Video Driver For Mac

Posted on by

Hauppauge's WinTV model 401 is a single slot PCI board for your PC which allows you to watch TV in a window on your PC screen. WinTV processes the video without requiring help from your PC's CPU, so your computer continues to run at full speed while WinTV is operating. Latest download for Hauppauge Win/TV 878/9 VFW Video Driver. Improve your pc peformance with this new update.

From Gateway: Click on the following links for the driver package readme info:
.../extract/Readme.txt
.../DRIVERS/Readme.txt
.../WIN2000/Readme.txt
.../VTPLUS32/Readme.txt
This package supports the following driver models:
  • Hauppauge Win/TV 848/9 VFW Driver
  • Hauppauge Win/TV 878/9 VFW Video Driver
  • Hauppauge Win/TV 878/9 VFW Audio Driver
  • Hauppauge - 878/9 VFW Video Driver - Bad/Missing SubvendorID
  • Hauppauge - 878/9 VFW Audio Driver - Bad/Missing SubvendorID
  • Hauppauge Win/TV
  • Hauppauge WinTV 848/9 WDM Video Driver
  • Hauppauge WinTV 878/9 WDM Video Driver
  • Hauppauge WinTV 878/9 WDM Audio Driver
  • Hauppauge - 878/9 WDM Video Hardware - Bad/Missing SubvendorID
  • Hauppauge - 878/9 WDM Audio Hardware - Bad/Missing SubvendorID

What do you need to know about free software?

  • WinTV under Windows XP



WinTV-PCI boards

All WinTV PCI models, including the WinTV GO, WinTV Theater, and Impact VCB models may be installed on Windows XP systems.

For instructions on reinstalling the WinTV PCI on Windows XP please follow these steps, using the software and drivers provided on that page.

As a general rule during all WinTV installations on Windows XP systems, be sure that you are disconnected from any LAN/WAN, and that the WinTV CD rom disk is not in your CD drive when installing any of the software updates from our website.

The RADIO and IR REMOTE software may also be downloaded and installed for applicable models.

For older model WinTV PCI and VCB boards based on the BT848 Chipset, as well as the WinTV Theater model, download and install the WinTV Driver 3.11 and Application 3.31

You may also alternatively use these versions for any of the WinTV PCI models if you are not having success using the WDM versions.

If you are having problems:
If you are having trouble with the WinTV installation on Windows XP, download and run the Hcwclearutility and run this to remove the existing WinTV files from the system. Choose 'total removal' and put a checkmark in the box for 'Search all .INF files for conflicting Bt8xx hardware' and click OK.

Download the driver and application and follow the instructions on the following page.

OR you may alternately use the following versions to address the problem:
Download and install the WinTV Driver 3.11 and Application 3.31 after following the above uninstall procedure.

TROUBLESHOOTING NOTES:

No Audio from the WinTV:
Most audio mixers are muted by default in Windows XP. Click start/Programs/Accessories/Entertainment/Volume control. Be sure that there is a separate LINE IN balance here, which is not muted, and has the volume level turned up.

If there is no LINE IN balance, you can add one by clicking options/properties, and putting a checkmark next to LINE IN.

In the WinTV program, click the AUD button for the audio configuration, and set the mixer to LINE IN, and be sure that the mixer level is turned up.

The external audio wire must be connected from the WinTV line out to the Line input of the soundcard.

The new 'De-Interlacer' software requires a VGA card that correctly supports video overlay mode.

'Failed to create TV Window, another application may be using the driver' error; 'Missing HCWCHAN.DLL' error, and missing 'HCWBTxxx.sys' error:
This indicates a driver installation problem. Try reinstalling the latest WinTV driver. You may need to follow the 'If you are having problems' instructions to first uninstall, and reload using the latest updates.

I am using the new WinTV2000 application with the 'de-interlacer' feature, and I am missing the remote applet that was once available to the right of the WinTV Window:
The video capture features are no longer available within this version of WinTV2000, however, you may achieve .AVI captures by using the provided AMCAP application which is installed with the WinTV driver installation.

IR Remote error: 'The Procedure Entry Point SUnMapLS could not be located in the dynamic link library Kernal32.dll':
Run the HCWCLEAR utility from your WinTV CD rom, choosing 'total removal' and put a checkmark in the box for 'Search all .INF files for conflicting Bt8xx hardware' Click OK. Reload the latest WinTV Driver, Application, and IR32 software. If this does not correct the issue, download and install the WinTV VFW drivers.

Controlling the audio source with Windows Movie Maker:
 If you open Windows Movie Maker, and do not hear audio, browse your WinTV CD rom, and within the MISC/UTILITY folder there is a utility called 'Audioselect'. Run this program, which will allow you to select the audio source(Line In). When the audioselect program is initialized, it will place an icon on the system tray (next to the clock). Click on the 'WinTV audio select' icon on the tray, which will open the dialogue. Here is where you will choose the source(ie. Line in).


WinTV-USB

The procedure to install the WinTV USB on Windows XP is as follows.

NOTE: Installation may be done with your WinTV CD if it is version 3.3 or later

As a general rule during all WinTV installations on Windows XP systems, be sure that you are disconnected from any LAN/WAN, and that the WinTV CD rom disk is not in your CD drive when installing any of the software updates from our website.

Install the latest WinTV USB driver HERE. After loading the drivers, connect the WinTV to the USB port on the PC (not a hub or keyboard).

Next, download and install the latest WinTV applicationsoftware.

For Radio models, you will also need the Radio software.

Samsung Video Driver For Mac

TROUBLESHOOTING NOTES:

No Audio from the WinTV:
Most audio mixers are muted by default in Windows XP. Click start/Programs/Accessories/Entertainment/Volume control. Be sure that there is a separate LINE IN balance here, which is not muted, and has the volume level turned up.

If there is no LINE IN balance, you can add one by clicking options/properties, and putting a checkmark next to LINE IN.

In the WinTV program, click the AUD button for the audio configuration, and set the mixer to LINE IN, and be sure that the mixer level is turned up.

The external audio wire must be connected from the WinTV line out to the Line input of the soundcard.

'Overlay mixer' errors when attempting to run WinTV:
Windows XP automatically sets the VGA colors to 32 bit color mode. Try changing the VGA colors to 16 bit or 24 bit.

Make sure that the proper, most recent Windows XP VGA drivers are installed for the video card.

Driver installation issues:
Download and run the Hcwclearutility and run this to remove the existing WinTV files from the system. Choose 'total removal' and put a checkmark in the box for 'Search all .INF files for conflicting Bt8xx hardware' and click OK. Reload using the latest software updates, or CD rom(version 3.3 or later disk).


WinTV-PVR pci boards

If Windows update installed the WDM drivers for the board, follow these steps:

First, click on Start and then RIGHT CLICK on MyComputer - Properties - Hardware - Device Manager. You should see the WinTV listed here. If they are listed as Hauppauge WinTV 878/9 WDM driver, right click on each listing and Uninstall. Close Device Manager.

As a general rule during all WinTV installations on Windows XP systems, be sure that you are disconnected from any LAN/WAN, and that the WinTV CD rom disk is not in your CD drive when installing any of the software updates from our website.

Download and run the Hcwclearutility and run this to remove the existing WinTV files from the system. Choose 'total removal' and put a checkmark in the box for 'Search all .INF files for conflicting Bt8xx hardware' and click OK.

This should remove any of the WinTV-PVR drivers from your PC.

To install the new drivers, go to the appropriate page on the Hauppauge support site and follow the instructions for installing the Latest Applications and Driver Updates. For example:

TheRADIO and IR REMOTE software may also be downloaded and installed.

TROUBLESHOOTING NOTES:

No Audio from the WinTV:
Most audio mixers are muted by default in Windows XP. Click start/Programs/Accessories/Entertainment/Volume control. Be sure that there is a separate LINE IN balance here, which is not muted, and has the volume level turned up.

If there is no LINE IN balance, you can add one by clicking options/properties, and putting a checkmark next to LINE IN.

In the WinTV program, click the AUD button for the audio configuration, and set the mixer to LINE IN, and be sure that the mixer level is turned up.

The external audio wire must be connected from the WinTV line out to the Line input of the soundcard.

Error when Recording video: 'C_DVC access is denied' and Error in pause mode: 'c:wintv access is denied'. The default capture and pause paths must be changed from C: to a different directory. Click Pref, Capture, and MPEG. Then click the Browse button. Change the DVCR record path and the Pause mode record path to a different directory other than the root C: and click OK.

Video Driver Update Windows 7


WinTV-PVR-USB and WInTV-PVR-USB2

The provided CD-ROM will allow you to successfully install the WinTV-PVR-USB on your Windows XP system.

As a general rule during all WinTV installations on Windows XP systems, be sure that you are disconnected from any LAN/WAN during the installation of the device.

Installing the files from the website:

The latest PVR USB software can be downloaded from HERE

It may be necessary to download the following 2 files, and copy them into the c:windowssystem32drivers folder:

HCWNCUSB.SYS

If no PVR drivers have been installed, you may download these files into a temporary folder on your hard drive, and point the driver installation to that folder.

TROUBLESHOOTING NOTES:

Uninstall/Reinstall for the WinTV-PVR usb:

Make sure that any previous versions of the software have been removed. Use the HCWCLEAR program from the installation CD. Choose the 'Total Removal' Option and put a checkmark in the box for 'Search all .INF files for conflicting Bt8xx hardware'. Then click on OK. Bypass any errors you may get and allow the DOS window to close on its own.

Also, delete the “Hauppauge” folder that is found in the C:WindowsSystem32 folder. You may also want to seach for and remove any files that begin with: BT84, WTV, or WINT.


WinTV-D

If Windows update installed the WDM drivers for the board, follow these steps:

First, click on Start and then RIGHT CLICK on MyComputer - Properties - Hardware - Device Manager. You should see the WinTV listed here. If they are listed as Hauppauge WinTV 878/9 WDM driver, right click on each listing and Uninstall. Close Device Manager.

As a general rule during all WinTV installations on Windows XP systems, be sure that you are disconnected from any LAN/WAN, and that the WinTV CD rom disk is not in your CD drive when installing any of the software updates from our website.

Download and run the Hcwclearutility and run this to remove the existing WinTV files from the system. Choose 'total removal' and put a checkmark in the box for 'Search all .INF files for conflicting Bt8xx hardware' and click OK.

Download and install the following files in this order:

WinTV Driver and reboot Windows.

WinTV Application Software

TROUBLESHOOTING NOTES:

No Audio from the WinTV:

Most audio mixers are muted by default in Windows XP. Click start/Programs/Accessories/Entertainment/Volume control. Be sure that there is a separate LINE IN balance here, which is not muted, and has the volume level turned up.

If there is no LINE IN balance, you can add one by clicking options/properties, and putting a checkmark next to LINE IN.

Hauppauge Wintv 8789 Vfw Video Driver For Macbook Pro

In the WinTV program, click the AUD button for the audio configuration, and set the mixer to LINE IN, and be sure that the mixer level is turned up.

The external audio wire must be connected from the WinTV line out to the Line input of the soundcard.


WinTV-HD

Hauppauge wintv 8789 vfw video driver for macbook pro

Installation from the provided CD rom will allow you to install the WinTV HD board on Windows XP systems correctly. You may alternately use the provided software updates from our website.

As a general rule during all WinTV installations on Windows XP systems, be sure that you are disconnected from any LAN/WAN during the installation of the device.

Graphics Driver