• Similar Content

  • By MaLd0n
    

    ---TUTORIAL---
    https://olarila.com/forum/viewtopic.php?f=50&t=8685
    --Original Post--
    https://olarila.com/forum/viewtopic.php?f=97&t=11237
    --Bios/UEFI Settings--
    *Update bios/uefi to F7+*
    1- Go to M.I.T./Advanced Frequency Settings tab
    Extreme Memory Profile (X.M.P.) - Profile 1
    2- Go to BIOS tab
    CSM Support - Disabled
    3- Go to Peripherals/Thunderbolt(TM) Configuration tab
    Security Level - No Security
    Thunderbolt USB Support - Enabled
    GPIO3 Force Pwr - Enabled
    4- Go to Chipset tab
    Internal Graphics - Enable
    ---CLOVER FOLDER---
    https://olarila.com/forum/download/file.php?id=25033
    *Use this folder with FULL DSDT PATCHED
    ---OPENCORE FOLDER---
    https://olarila.com/forum/download/file.php?id=24376
    *Use this folder with FULL DSDT PATCHED
    ---Extract one Full dump for DSDT edits, post files---
    RunMe.app
    ---HARDWARE---
    --MOBO
    GIGABYTE Z390 DESIGNARE
    -Link
    https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1
    --PROCESSOR
    Intel Core i9-9900K
    -Link
    https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1
    --COOLER
    CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
    -Link
    https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4
    --MEMORY
    Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
    -Link
    https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15
    --GPU
    MSI RX Vega 64 AIR Boost 8G OC
    -Link
    https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2
    --SSD
    Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
    -Link
    https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1
    --POWER SUPPLY
    EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular
    -Link
    https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3
    --WIRELESS
    TP-Link Archer T9E
    -Link
    https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1
    --CASE
    Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
    -Link
    https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2
    --DSDT Patches--
    -FIX ACPI ERRORS-FIX OEM SSDTs to AVOID ERRORS AND WARNINGS-REMOVE UNUSED SCOPES / DEVICES-HIGH PRECISION EVENT TIMER-SATA-DMAC-REMOVE PROBLEMATIC AND UNUSED DEVICES-FIX K.P in REBOOT-SLPB-DARWIN / WINDOWS 2015-XHCI-PLUGIN TYPE-HDAS to HDEF-HDEF-REAL TIME CLOCK-ARTC-IRQs-SBUS-BUS1-MCHC-ALS0-SHUTDOWN-LAN-FWHD-USBX-PMCR-PPMC-XSPI-CNVW-GMM-IMEI-EC-PNLF-ARPT-GFX0-NVME-DTGP-ACQUIRE MUT0 0XFFFF-MUTEX MUT0 0x00-EXTERNAL REFERENCES-UNKNOWNOBJ-HDMI / HDAU-FULL RENAMED DEVICES ---SCREENSHOTs---
    -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    Thanks to KGP for SSDT Thunderbolt
    Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
    We're all here to have fun and learn from each other!
    
  • By shinho73
    

    Can someone help me fix reboot issue? Actually it reboots, but sometimes the hackintosh just hangs with screen off. Here is the Extra folder containing org.chameleon.boot.plist. https://drive.google.com/drive/folders/1MX8-DpQk9kaRUfjPcToxf-ElWh-bN6EY?usp=sharing and the spec of the PC. https://drive.google.com/drive/folders/1NlcUNK5DBzJFxeFeuyt92eRjQqwO5T32?usp=sharing Can someone look at it? I might be doing something wrong. Any help will be greatly appreciated. Thank you.
    
  • By fusion71au
    

    This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.
    It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
    Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.
    Prerequisites
    Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app' downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”
    Procedure
    1. Boot into Yosemite with the kext-dev-mode=1 boot flag
    2. Open OS X terminal and type the following lines, followed by <Enter> after each line.
    The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System'....
    sudo -shdiutil attach /Applications/Install OS X El Capitan.app/Contents/SharedSupport/InstallESD.dmgasr restore -source /Volumes/OS X Install ESD/BaseSystem.dmg -target /Volumes/Installer -erase -format HFS+ -noprompt -noverifyrm /Volumes/OS X Base System/System/Installation/Packagescp -av /Volumes/OS X Install ESD/Packages /Volumes/OS X Base System/System/Installationcp -av /Volumes/OS X Install ESD/BaseSystem.dmg /Volumes/OS X Install ESD/BaseSystem.chunklist /Volumes/OS X Base Systemdiskutil unmount /Volumes/OS X Install ESDexit 3. Right click on the “OS X Base System” Volume and click “Get Info”
    4. Click on the lock icon and untick “Ignore ownership on this volume”
    5. Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist. NB It is found in the 'Essentials.pkg' in /System/Installation/Packages
    6. Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
    7. Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
    8. Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
    sudo -schmod -R 755 /Volumes/OS X Base System/Library/Extensionschown -R 0:0 /Volumes/OS X Base System/Library/Extensionstouch /Volumes/OS X Base System/System/Library/Extensionskextcache -u /Volumes/OS X Base Systemexit Any errors should be noted but the output below is normal e.g.
    9. Install your Bootloader targeting the OS X Base System volume
    10. Boot your system with the USB without injected kexts into the OS X Installer GUI....
    Post Install
    The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts. In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
    1. Boot into Yosemite with the kext-dev-mode=1 boot flag
    2. Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
    3. Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
    4. Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel. In this example, the El Capitan volume is named 'El_Capitan' - change if you have named it something else...
    sudo -schmod -R 755 /Volumes/El_Capitan/Library/Extensionschown -R 0:0 /Volumes/El_Capitan/Library/Extensionstouch /Volumes/El_Capitan/System/Library/Extensionskextcache -u /Volumes/El_Capitanexit 5. Install your Bootloader targeting the El Capitan volume. This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
    6. Reboot your system without injected kexts into El Capitan!
    Other links
    The All-In-One Guide to Vanilla OS X for beginners
    Updates for Sierra and High Sierra Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator 'PLK.tool' for Sierra + El Capitan. Instructions: 1. Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder. 2. Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3. Copy BaseSystem.dmg to ~/Downloads/BaseSystem 4. Open terminal and run the following commands... cd ~/Downloads/BaseSystemchmod +x PLK.tool./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop. macOS High Sierra bypass Firmware and MBR checks in post#13.
    BaseSystem_PLK.tool_ElCap.zip
    BaseSystem_PLK.tool_Sierra.zip
    BaseSystem_PLK.tool_Mojave.zip (need to run in Mojave to avoid dependency errors)
    BaseSystem_PLK.tool_Catalina.zip
    
  • By fusion71au
    

    Clover r5051 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
    Tested with unlocked Workstation 15 running OSX 10.9 -->10.15 guest in Windows X64 host.
    Installation
    1. Download and unzip 'EFI_Clover_r5051 for VMware.zip'. Mount Clover-v2.5k-5051-X64.iso by double clicking on it.
    2. Mount your VM's EFI System Partition eg in terminal
    sudo diskutil mount disk0s1 3. Copy EFI folder from step 1 into the EFI partition
    4. Shutdown the VM, add bios.bootDelay = '3000' to your VM's vmx file
    5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
    Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    

Dear Members, I buy new Graphic Card Gigabyte ATI Radeon R7 240. I can't find suitable or correct kext/driver for Mac OS X Mavericks. I hope anyone can assist/help me to solve my problem. Powered by AMD Radeon™ R7 240: AMD App Acceleration Speeds up daily applications such as web browsing and video playback. Also the first to provide support for both OpenCL, C++ AMP, and DirectCompute 11. AMD Virtual Super Resolution (VSR) is offered by the AMD Radeon™ R9 380, R9 370, R9 360 and the AMD Radeon™ R9 290 Series and R9 285 OEM graphics cards and is designed to automatically re-render games at higher resolutions and dynamically rescale them for HD displays at higher quality and details. Solved can i use this graphic card Sapphire AMD/ATI Radeon R7 240 with Boost R7 240 2 GB DDR3 Graphics Card my max budget is below 6 solved on the AMD FM2 processer, is this prossesser able to use. Whenever manufacturers release new hardware, they will also launch compatible drivers to allow hardware to function properly. Over a series of days or weeks, the manufacturer will likely continue to release updated drivers to fix new and unforseen errors. I recently upgraded my psu to a corsair 500 cx builder series and purchased a ATI Radeon R7 2xx low profile series gpu. PSU runs fine but having problems with installing gpu software.

The Download Radeon R7 240 Driver Free is marginally inferior to the MSI GT 730 on diversion outline rates, however it’s generally close, with the lead generally exceeding around 2.2fps. Like the GT 730, however, the R7 240 will battle at resolutions of 1680×1050 or more.

Ati Radeon R7 240 Drivers